IACS Publishes Recommendation on Onboard Lifting Equipment

22 April 2026

(Image credit: IACS)

IACS, the membership organization for the world’s leading classification societies, has published a Recommendation to improve safety standards for lifting appliances, in line with SOLAS regulations covering both new and existing lifting appliances.

Lifting appliances play a vital role in cargo handling and ship operations, yet their limited structural redundancy has long posed safety risks for crews and vessels. To address these hazards, the International Maritime Organization (IMO) has introduced new mandatory requirements for the design, construction, installation, testing, examination, marking, maintenance, inspection, and operation of lifting appliances under the SOLAS Convention. These regulations entered into force on January 1, 2026, and aim to prevent failures that have previously resulted in fatalities, injuries, lifting appliance loss, and ship damage.

The new SOLAS regulations apply to all new lifting appliances installed on or after January 1, 2026, and to existing lifting appliances and associated loose gear no later than the first renewal survey on or after that date. Regulation II-1/3-13 introduces requirements for the classification of standard design and construction, periodic load testing, and thorough examinations for both new and existing lifting appliances.

IACS strongly supports the inclusion of lifting appliances within the SOLAS Convention, recognizing the substantial improvement this brings to maritime safety. In support of this new framework and to facilitate consistent global implementation of the SOLAS regulations, IACS has developed a comprehensive Recommendation on Onboard Lifting Appliances, providing guidance on, for example:

Distinguishing between new and existing lifting appliances;
Application of SOLAS regulation II-1/3-13 to lifting appliances with a safe working load below 1,000 kg;
What information is the prerequisite to account for existing lifting appliances and loose gear that enters into the SOLAS regime (certificates, load test, and thorough examination);
Examples of loose gear to which the application of SOLAS regulation II-1/3-13 should be considered, and for which it should not, and the documentation required for the consideration of existing loose gear in the SOLAS regulation II-1/3-13 regime;
Appliances serving as launching appliances for survival craft or rescue boats and as lifting appliances for cargo handling (dual use);
Necessary documentation and certification procedure for equipment with modification or alteration of major character;
Survey and testing regimes and timeframes, including alignment with the Harmonized System of Survey and Certification (HSSC);
Date of the initial verification of compliance with SOLAS regulation II-1/3-13 regime.

Commenting on the new Regulation, Robert Ashdown, IACS Secretary General, said:

“As the new SOLAS requirements take effect, close cooperation among classification societies, Flag State Administrations, and industry stakeholders will be essential. IACS remains committed to providing clear, practical guidance and supporting the maritime sector in achieving safer lifting operations worldwide, and the new IACS Recommendation will help ensure the consistent application of the SOLAS rules and reduce the risks to crew and vessels of lifting appliance failure.”

The new IACS Recommendation builds on the SOLAS regulations by providing detailed reference to relevant aspects of SOLAS and the scenarios relating to the various modes of application of lifting appliances. It also clarifies the classification of lifting appliances to which SOLAS II-1/3-13 applies, as well as clear examples of lifting appliances to which SOLAS II-1 Reg 3-13 may or may not apply.

The Recommendation follows on from prior work by IACS to enhance lifting appliance safety. IACS had already issued a new Unified Interpretation (UI SC310, July 2025)—also published by IMO as MSC.1/Circ.1696—which introduces a ‘factual statement’ template confirming testing and examination of non-certified existing lifting appliances in accordance with MSC.1/Circ.1663.

The new IACS Recommendations build on this by suggesting the use of ‘Factual Statements’ and highlight the critical importance of the nomination of a Safe Working Load (to the satisfaction of the Administration), in line with UI SC 310 (MSC.1/Circ.1696), for existing lifting appliances without valid certificates of test and thorough examination.

IACS also published Recommendation No. 191 in 2025 for lifting appliances involved in personnel handling operations.

Full details of the ‘Recommendation on Onboard Lifting Appliances’ can be found on the IACS website at https://iacs.org.uk/resolutions/recommendations/181-200/rec-198.