SBG Inertial Navigation Systems Tested During Hydrographic Survey

SBG Systems put all its Inertial Navigation Systems to the test during a three-day hydrographic survey in the Hamburg port area, in Germany. Test results take the form of interactive maps so hydrographers can select a product and compare its performance through seafloor maps.

SBG Inertial Sensors Put to the Test

During the test, SBG Systems and their local partner McArtney GmbH have surveyed the Hamburg port area in Germany. They have tested three grades of their MEMS INS (Ellipse, Ekinox, Apogee) with their FOG Inertial Navigation Systems all coupled with a Multi Multibeam Echosounder. SBG FOG-based INS named Horizon was post-processed within Qinertia PPK software to be used as a reference. The test was conducted in challenging conditions such as bridge crossing or dense urban areas, with the main focus being testing motion and position during GPS outages.

An Interactive Guide to Comparing Inertial Sensors

SBG Systems’ goal in this experiment was to provide professionals a guide to find out which sensor was best suited for a particular condition or situation. The test reports show how their inertial sensors perform in different scenarios encountered during hydrographic surveys. The different versions of the results (web maps, 3D models…) allow to easily compare product performance.

For more information about the Test Reports, click here.

Latest Issue:

Advances in underwater imaging helps illuminate, in every sense, just how far ocean exploration has come in years. Today, we…

Your cON&Tent matters. Make it count.

Send us your latest corporate news, blogs or press releases.