Webtool Cutter Goes Downhole for James Fisher Decommissioning

The SEABASS single trip subsea well abandonment tool being lowered overboard. (Image credit: Allspeeds)

Allspeeds, manufacturer of Webtool hydraulic cutters, has supplied a downhole cutter for James Fisher Decommissioning’s SEABASS single trip subsea well abandonment tool.

The smallest Webtool steel wire cutter so far at just 172 mm, it is tightly integrated within the downhole tool to cut mixed material steel wire and hydraulic lines.

The SEABASS well abandonment tool is a single trip, mechanically locking system for category two wells. Once lowered downhole, the SEABASS perforates single or multiple casing strings. Upper and lower perforation devices create a flow path through the casing to remove contaminants back to the surface vessel for safe disposal.

The Webtool cutter is used to cut the connection to the lower perforation device which is left in the hole. The hole is then filled and sealed with an environmental cement plug.

Photo 2 The tiny Webtool cutter used in the SEABASS toolThe smallest Webtool cutter so far at just 172mm. (Image credit: Allspeeds)

Precise Fit

The Webtool cutter fits sideways within the SEABASS tool’s internal bore of just 210 mm (8.25”), whilst still being capable of cutting a steel wire and two hydraulic lines in a single operation. Incorporating a double acting cylinder, the 172 mm (6.75”) high cutter weighs less than 6.5 kg, making it the smallest subsea cutting tool ever produced by Allspeeds.

“The Webtool was an excellent solution for us, making that part of the operation both simple and reliable. It was great to work with Allspeeds on this project and their equipment helped make it a success for the maiden campaign in 2022,” said Richard Henderson, Engineering Director, James Fisher Decommissioning.

“Our precision manufacturing capability has allowed us to produce this tiny cutter to the same exacting performance standards we expect from our larger cutters,” commented Rory McGarry, Technical Director, Allspeeds. “With over 30 years’ experience in the design and manufacture of Webtool hydraulic cutters for offshore and subsea, we are still pushing the boundaries in cutter design and operation.”

The Webtool range of high-performance cutting tools is designed and manufactured exclusively by Allspeeds Ltd.

Latest Issue:

The ocean sector is fully immersed in a fundamental paradigm shift, with advances in Uncrewed Vehicles & Marine Robotics giving…

Your cON&Tent matters. Make it count.

Send us your latest corporate news, blogs or press releases.

Search